The Chemtec MiniBLOCK provides users with a complete stainless steel fluid metering block for injecting a wide variety of fuel additives or dyes. MiniBLOCK serves as a ”slave device” to a user-supplied “master controller”. The product is accurate, reliable and compatible with a wide range of chemicals.

> "Slave" injector block
> Compact, stainless steel block design
> Accurate to 0.50% of flow rate.
> Two flow meter sizes available
> For use in Hazardous Locations
> Available unmounted or 1-PAC through 6-PAC configuration
> Optional thermal relief kit and calibration kit available

Download the MiniBLOCK v3 Product Bulletin

Download the MiniBLOCK v4 Product Bulletin

MiniBLOCK PACs are available in 1-PAC through 6-PAC configurations. These PACs simplify the installation of MiniBLOCK injectors in the field. PACs can be ordered with a mix of 7718 and 7738 MiniBLOCKS.

Chemtec manufactures custom injectors for a wide range of applications and flow rates. These injectors can be supplied in a "slave" version when an external controller is used or in a "smart" version utilizing Chemtec's ProPAC5/6 controller.

> Available either unmounted, plate-mounted or skid mounted
> Multiple flow meter options
> Multiple solenoid options
> Accurate to 0.25-0.50% of flow rate.
>For use in Hazardous Locations

Download the High Flow Injector Product Bulletin

The Chemtec Multi-Additive Injector is used to deliver multiple additives through a single flowmeter. This low-cost option for additive injection relies on an external controller to flush the additive line at the end of each batch.

> Multiple flow meter options
> Multiple solenoid options
> Accurate to 0.25-0.50% of flow rate.
>For use in Hazardous Locations